Synthesis and in vitro characterization of chlorpheneramine-laden liposomes for topical applications.

This study was aimed at synthesizing liposomes for the topical delivery of chlorpheneramine maleate using three-level factorial design. Each experiment consisted of a varying proportion of cholesterol, lecithin and a permeation enhancer mixture of Tween80 and polyethylene glycol (PEG1000), and resultant liposomes were extensively characterized. The drug release study was conducted at 6.0 pH, 37±1ºC temperature and 100 rpm rotation speed utilizing a cellophane membrane pouch in a USP type II dissolution apparatus. Among formulations, L5 was considered as the optimal formulation because of high drug loading (99.05%), 87.71% drug release within 4 hours, high drug loading and the optimized formulation was found to be stable during stability testing. This high drug loading and release was achieved at low level of cholesterol and lecithin (0.1: 0.3g) and high level of permeation enhancer mixture (0.2g) as revealed by the surface plots. The drug release from the optimized formulation followed Fickian diffusion as revealed by Korsmeyers-Peppas kinetic model. In summary, combination of PEG1000 and Tween80 with lecithin and cholesterol can be successfully used to develop liposomes that efficiently incorporated chlorpheneramine. This formulation therefore has the potential to be used as a topical anti-allergic product.

De-risking excipient particle size distribution variability with automated robust mixing: Integrating quality by design and process analytical technology.

BACKGROUND: Particle size distribution (PSD) variability in excipients affects mixing. In response, manufacturers rely on raw material control and rigidly defined process parameters to achieve quality. However, this status quo is costly; and diverges from regulatory exceptions for process robustness. Although robustness improves cost and material usage efficiency, it remains under-adopted. METHOD: To address this gap, a robust batch mixing operation that mitigated the impact of PSD variability was evaluated, with blends comprising chlorpheniramine, microcrystalline cellulose and lactose. PSD of lactose was varied to simulate commercially-relevant variability. Due to PSD-induced rheological variations, the blends had different optimal mixing speeds. For the automation study, near infrared (NIR) spectroscopy; process optimization and endpoint detection algorithms; and control hardware were integrated within a cluster of software environments. NIR spectroscopy was employed for in-line PSD characterization and blend monitoring, to modulate mixing speed and detect endpoint (feedforward and feedback control). RESULTS: NIR spectroscopy rapidly detected PSD variations by the 6th-9th rotations, to activate feedforward control, which mitigated the effect of PSD variability and reduced the mixing time by 13-34%. Endpoints were correctly detected. PSD variations and blend homogeneity were accurately predicted (relative standard error of prediction ≤ 2%). CONCLUSION: The automated robust mixing operation was successful. Pertinently, NIR spectrometer can be adopted for multimodal sensing. Its applicability for production-driven characterization of raw materials in batch and continuous pharmaceutical processing should be further explored. Lastly, this study laid the groundwork for end-to-end implementation of process analytical technology in robust batch processing.

Metal-Organic Framework with Dual Active Sites in Engineered Mesopores for Bioinspired Synergistic Catalysis.

Here we report the design of an enzyme-inspired metal-organic framework (MOF), 1-OTf-Ir, by installing strong Lewis acid and photoredox sites in engineered mesopores. Al-MOF (1), with mixed 2,2'-bipyridyl-5,5-dicarboxylate (dcbpy) and 1,4-benzenediacrylate (pdac) ligands, was oxidized with ozone and then triflated to generate strongly Lewis acidic Al-OTf sites in the mesopores, followed by the installation of [Ir(ppy)2(dcbpy)]+ (ppy = 2-phenylpyridine) sites to afford 1-OTf-Ir with both Lewis acid and photoredox sites. 1-OTf-Ir effectively catalyzed reductive cross-coupling of N-hydroxyphthalimide esters or aryl bromomethyl ketones with vinyl- or alkynyl-azaarenes to afford new azaarene derivatives. 1-OTf-Ir enabled catalytic synthesis of anticholinergic drugs Pheniramine and Chlorpheniramine.

A mechanistic understanding of compression damage to the dissolubility of coated pellets in tablets.

Damage to the drug diffusion coat barrier of controlled release pellets by the compaction force when preparing multiple-unit pellet system tablets is a major concern. Previous studies have shown that pellets located at the tablet axial and radial peripheral surfaces were more susceptible to damage when compacted due to the considerable shear encountered at these locations. Hence, this study was designed to assess with precision the impact of pellet spatial position in the compact on the extent of coat damage by the compaction force via a single pellet in minitablet (SPIM) system. Microcrystalline cellulose (MCC) pellet cores were consecutively coated with a drug layer followed by a sustained release layer. Chlorpheniramine maleate was the model drug used. Using a compaction simulator, the coated pellets were compacted singly into 3 mm diameter SPIMs with MCC as the filler. SPIMs with individual pellets placed in seven positions were prepared. The uncompacted and compacted coated pellets, as SPIMs, were subjected to drug release testing. The dissolution results showed that pellets placed at the top-radial position were the most susceptible to coat damage by the compaction force, while pellets positioned within the minitablet at the middle and upper quadrant positions showed the least damage. The SPIM system was found to be effective at defining the extent of coat damage to the pellet spatial position in the compact. This study confirmed that coated pellets located at the periphery were more susceptible to damage by compaction, with pellets located at the top-radial position showing the greatest extent of coat damage. However, if the pellet was completely encrusted by the cushioning filler, coat damage could be mitigated. Further investigations were directed at how the extent of coat damage impacted drug release. Interestingly, small punctures were found to be most detrimental to drug release whilst coats with large surface cuts did not completely fail. A damaged pellet coat has some self-sealing ability and failure is not total. Thus, this study provides a deeper understanding of the consequence of coat damage to drug release when sustained release coated pellets are breached.

Facile electrochemical preparation of overoxidizedpolypyrrole/RGO composite for ds-DNA immobilization: a novel signal amplified sensing platform for electrochemical determination of chlorpheniramine.

BACKGROUND: Chlorpheniramine (CPA), thanks to its relatively lower side effects, is a widely prescribed medicine for alleviating allergic symptoms as well as some medical emergencies. Owning to this extensive use, many efforts have been directed to measure chlorpheniramine both in vivo and in vitro. High performance liquid chromatography (HPLC), both normal and reverse phase, as well as spectrochemical and electrochemical methods are analytical approaches which have been extensively exploited for determination of CPA. Among them, electrochemical techniques have found elegant place for analysis of CPA due to simplicity, sensitivity and ease of instrumentation. METHODS: Herein, we have reported the preparation and characterization of a biosensor by immobilization of double-stranded DNA on the surface of overoxidizedpolypyrrole-reduced graphene oxide modified pencil graphite electrode (ds-DNA-PPyox/RGO/PGE) as well as its novel usability in measurement of chlorpheniramine (CPA). Scanning electron microscopy (SEM), electrochemical impedance spectroscopy (EIS), UV-Vis spectroscopy and differential pulse voltammetry (DPV) were exploited in order to characterize and evaluate the performance of the proposed biosensor. RESULTS: Final results showed that proposed strategy for modification of PGE introduces an ultra-sensitive biosensor for CPA which offers the best detection limitamong all previously reported electrochemical sensors for CPA. Taking advantage of this biosensor for determination of CPA, a wide linear dynamic range from 0.05 to 200 µM, and a low limit of detection 0.023 µM were obtained by using DPV method. Usability of this biosensor was also confirmed by determination of CPA in tablet and spiked urine samples. CONCLUSIONS: Overoxidized polypyrrole-reduced graphene oxide offered a suitable substrate for immobilization of ds-DNA by which a new biosensor for determination of CPA was fabricated. Proposed biosensor can successfully be used for determination of CPA in urine samples taking advantage of electroanalytical methods. Graphical abstract.

Precision Printing of Customized Cylindrical Capsules with Multifunctional Layers for Oral Drug Delivery.

Advances in personalized medicine will require custom drug formulations and delivery mechanisms. Herein, we demonstrate a new type of personalized capsule comprising of printed concentric cylindrical layers with each layer having a distinctive functional drug component. Poly ε-caprolactone (PCL) with paracetamol (APAP) and chlorpheniramine maleate (CM), synergistic drugs commonly used to alleviate influenza symptoms, are printed as an inner layer and outer layer, respectively, via microscaled electrohydrodynamic (EHD) printing. Polyvinylpyrrolidone (PVP) nanofibers are embedded as interlayers between the two printed PCL-drug layers using electrospinning (ES) techniques. The complete concentric cylindrical capsule with a 6 mm inner diameter and 15 mm length can be swallowed for oral drug delivery. After dissolution of the PVP interlayer, the capsule separates in two, with inner and outer capsules for continuous drug dosing and targeting. Imaging was achieved using a 3T MRI system which allowed temporal observations of the targeted release through the incorporation of nanoparticles (Fe3O4). The morphology and structure, chemical composition, mechanical properties, and biocompatibility of the capsules were studied in vitro. In summary, this new type of custom printed and electrospun capsule that enabled component separation, targeted drug release may advance personalized medicine via multidrug oral delivery.

Near infrared spectroscopy for rapid and in-line detection of particle size distribution variability in lactose during mixing.

Particle size distribution (PSD) variability in excipients may cause unacceptable prolongation of mixing time needed to achieve blend homogeneity. Therefore, it is vital to modulate mixing through real-time monitoring of PSD variability. Notwithstanding the criticality of PSD variability, real-time measurement of PSD during mixing is relatively unexplored; and this is the focus of the present study. The model excipient was commercial grade lactose with modified PSD that conformed to the manufacturer's specifications. It was mixed with microcrystalline cellulose and chlorpheniramine in a double-cone blender. High and low dose blends were prepared and near infrared spectroscopy (NIRS) was used to collect spectral data, during mixing, for chemometric modelling of PSD. Four modelling approaches based on partial least squares regression (PLSR) were applied. The models were highly interpretable and rapidly measured PSD near the beginning of mixing (5th to 6th rotation), with accuracy (relative standard error of prediction <5.0%, r2 ≈ 1.00, slope ≈ 1.00). Therefore, NIR chemometric modelling is a viable strategy to detect variability in PSD of excipients during blending and could enable real-time control of mixing. Most significantly, this strategy is potentially transferable to the monitoring and controlling of batch and continuous processes, where PSD is either a source of process variability or a critical quality attribute.

Chlorpheniramine maleate containing chitosan-based nanoparticle-loaded thermosensitive in situ gel for management in allergic rhinitis.

The aim of the present study was to fabricate a thermosensitive gel containing chlorpheniramine maleate (CPM)-loaded nanoparticles following intranasal administration for effective treatment of allergic rhinitis. Chitosan-based nanoparticles were prepared by a precipitation method followed by the addition of developed NPs within the poloxamer 407- and carbopol 934P-based mucoadhesive thermoreversible gel. Developed formulations were evaluated for particle size, PDI, % entrapment efficiency, and % cumulative drug permeation. NP3 formulation was found to be optimized on the basis of minimum particle size (143.9 nm), maximum entrapment efficiency (80.10 ± 0.414%), and highest drug permeation (90.92 ± 0.531%). The optimized formulation NP3 was then formulated into thermoreversible in situ gel. This intensifies the contact between the nasal mucosa and the drug and increases and facilitates the drug absorption which results in increased bioavailability. G4 formulation was selected as the optimized formulation on the basis of gelation ability and mucoadhesive strength. Histology was carried out to examine the damage caused by the optimized G4 formulation. Results revealed no visual signs of tissue damage thus indicated safe nasal delivery of nanoparticulate in situ gel formulation G4. Thus, intranasal CPM NP-loaded in situ gel was found to be a promising formulation for the management of allergic rhinitis.

In situ immobilization of sulfated-ß-cyclodextrin as stationary phase for capillary electrochromatography enantioseparation.

In this work, a novel sulfated-ß-cyclodextrin (S-ß-CD) coated stationary phase was prepared for open-tubular capillary electrochromatography (OT-CEC). The capillary was developed by attaching polydopamine/sulfated-ß-cyclodextrin (PDA/S-ß-CD) onto the gold nanoparticles (AuNPs) coated capillary which was pretreated with polydopamine. The results of scanning electron microscopy (SEM) and energy dispersive X-ray analysis spectroscopy (EDS) indicated that polydopamine/sulfated-ß-cyclodextrin was successfully fixed on the gold nanoparticles coated capillary. To evaluate the performance of the prepared open tubular (OT) column, the enantioseparation was carried out by using ten chiral drugs as model analytes. Under the optimal conditions, salbutamol, terbutaline, trantinterol, tulobuterol, clorprenaline, pheniramine, chlorpheniramine, brompheniramine, isoprenaline and tolterodine were baseline separated with the resolution (Rs) values of 3.25, 1.76, 2.51, 1.89, 3.17, 2.17, 1.99, 1.72, 2.01 and 3.20, respectively. Repeatability of the column was studied, with the relative standard deviations for run-to-run, day-to-day and column-to-column lower than 5.7%.

Some thoughts about enantioseparations in capillary electrophoresis.

In this overview the goal of the authors was to analyze from the historical perspective the reasons of success and failure of chiral capillary electrophoresis. In addition, the current trends are analyzed, unique advantages of capillary electrophoresis are highlighted and some future directions are discussed.

Removal of chlorpheniramine and variations of nitrosamine formation potentials in municipal wastewaters by adsorption onto the GO-Fe3O4.

Chlorpheniramine is a pharmaceutical pollutant and a precursor of carcinogenic nitrosamines during disinfection/oxidation. In our previous study, graphene oxide coated with magnetite (GO-Fe3O4) was capable of removing chlorpheniramine in deionized water by adsorption. This study investigated the removal of chlorpheniramine and its nitrosamine formation potentials (FPs) by adsorption onto magnetic GO-Fe3O4, with respect to the influence by using real municipal wastewaters as the background. In the results, the adsorption performances of chlorpheniramine in wastewaters decreased in the order: GO-Fe3O4 suspension > GO-Fe3O4 particles > activated carbon. Chlorpheniramine adsorptions on GO-Fe3O4 particles and activated carbon were reduced by using real wastewaters as the background, whereas chlorpheniramine adsorption on GO-Fe3O4 suspension was enhanced due to the effects of surface charge on GO-Fe3O4 and ionic strength variation in water. The fittings of adsorption isotherms indicated that the wastewater background reduced the surface heterogeneity of GO-Fe3O4 suspension and improved the adsorption performance. Appreciable removal efficiencies of NDMA and other nitrosamine FPs were observed when GO-Fe3O4 particles were added in real wastewaters. However, when chlorpheniramine was present in wastewaters, chlorpheniramine adsorption and degradation reaction simultaneously occurred on the surface of GO-Fe3O4, increasing NDMA and other nitrosamine FPs in wastewaters after GO-Fe3O4 addition for chlorpheniramine adsorption. The assumption was further demonstrated by observing the NDMA-FP increase during chlorpheniramine adsorption on GO-Fe3O4 in deionized water. GO-Fe3O4 is a potential adsorbent for chlorpheniramine removal. Nevertheless, the low treatment efficiencies at high doses limit its application for nitrosamine FP adsorptions in real wastewaters.

Electrospinning Optimization of Eudragit E PO with and without Chlorpheniramine Maleate Using a Design of Experiment Approach.

Electrospinning is increasingly becoming a viable means of producing drug delivery vehicles for oral delivery, particularly as issues of manufacturing scalability are being addressed. In this study, electrospinning is explored as a taste-masking manufacturing technology for bitter drugs. The taste-masking polymer Eudragit E PO (E-EPO) was electrospun, guided by a quality by design approach. Using a design of experiment, factors influencing the production of smooth fibers were investigated. Polymer concentration, solvent composition, applied voltage, flow rate, and gap distance were the parameters examined. Of these, polymer concentration was shown to be the only statistically significant factor within the ranges studied ( p-value = 0.0042). As the concentration increased, smoother fibers were formed, coupled with an increase in fiber diameter. E-EPO (35% w/v) was identified as the optimum concentration for smooth fiber production. The optimized processing conditions identified were a gap distance of 175 mm, an applied voltage of between 15 and 20 kV, and a flow rate of 1 mL/h. Using this knowledge, the production optimization of electrospun E-EPO with chlorpheniramine maleate (CPM), a bitter antihistamine drug, was explored. The addition of CPM in drug loads of 1:6 up to 1:10 CPM/E-EPO yielded smooth fibers that were electrospun under conditions similar to placebo fibers. Solid-state characterization showed CPM to be molecularly dispersed in E-EPO. An electronic tasting system, or E-tongue, indicated good taste-masking performance as compared to the equivalent physical mixtures. This study therefore describes a means of producing, optimizing, and assessing the performance of electrospun taste-masked fibers as a novel approach to the formulation of CPM and potentially other bitter drug substances.

Simultaneous Quantification of Chlorpheniramine, Phenylephrine, Guaifenesin in Presence of Preservatives with Detection of Related Substance Guaiacol in their Cough Syrup by RP-HPLC and TLC-Densitometric Methods.

Two sensitive chromatographic methods have been developed, and validated for chlorpheniramine maleate (CM), phenylephrine (PE) and guaifenesin (GF) determination in their mixture and in presence of GF related substance guaiacol (GL) and preservative namely; sodium benzoate (NaB). The first method was based on thin layer chromatographic separation (TLC) followed by densitometric determination of the separated spots. The separation was achieved using silica gel 60 F254 TLC plates and ethyl acetate: methanol: toluene: ammonia (7:1.5:1:0.5, by volume) as a developing system. Densitometric quantification of the three drugs was carried by the reflectance mode at 270 nm. The second method was based on the use of high-performance liquid chromatography with diode array detection, by which the proposed components were separated on a reversed phase C18 analytical column using phosphate buffer pH 2.9 (containing 0.1 g Heptane-1-sulphonic acid sodium salt) and acetonitrile (85:15, v/v) at 0.8 mL/min for 4 minutes then 1 mL/min till end of the run using flow rate online switching technique. Both methods were validated according to the ICH guidelines and successfully applied for the determination of CM, PE, and GF in pure powder and in combined cough syrup without interference from the excipients.

Investigating the effect and mechanism of particle size distribution variability on mixing using avalanche testing and multivariate modelling.

Particle size distribution (PSD) variability in excipients is widely thought to affect the mixing process and the achievement of blend homogeneity. Yet, few studies have addressed this issue by attempting to ascertain the relationship and elucidate its mechanism. To address this, the model material, lactose, was modified to reflect commercially relevant PSD variations and mixed with microcrystalline cellulose and chlorpheniramine in a double-cone blender. Multivariate modelling and avalanche testing were applied to elucidate the relationship and mechanism. PSD variability can cause significant change in mixing time, by 8 times and 3 times (p ≈ 0.00) for high and low dose drug formulations, respectively. Achievement of blend homogeneity depended on the dispersive mixing mechanism (r2 = 0.99). Dispersive mixing was adversely affected by powder cohesiveness and powder dilation, which increased as the proportion of fine particles in lactose powder increased. This study yielded three conclusions. Firstly, PSD variability in pharmaceutical grade excipients can cause unacceptable prolongation in mixing time. Secondly, the impact of PSD variability on continuous mixing and other batch mixing of various scales, requires investigation. Lastly, the current findings can contribute to the development of robust mixing operations in the form of offline pre-emptive measures and inline process control strategies.

Fabrication of Hierarchical Polymeric Thin Films by Spin Coating Toward Production of Amorphous Solid Dispersion for Buccal Drug Delivery System: Preparation, Characterization, and In Vitro Release Investigations.

The landscape of thin films is continuously evolving as an attractive self-administration mean to drive patient compliance. This work reports incorporation of drugs into various polymeric compositions using spin coating technology to screen amorphous solid dispersion film formation for buccal applications. Polarized light microscopy and differential scanning calorimetry were used for characterization. Physical stability was assessed after films storage at 0% RH/25°C for 6 months. Chlorpheniramine maleate, theophylline, and famotidine were used as model drugs and mixed with Opadry amb II® or Kollicoat IR®. Acryl-EZE II® or Zein was also used as surface (design I) or surface and base polymers (design II). Of all the drug-Opadry combinations, only chlorpheniramine was amorphously dispersed up to 25% (w/w). In contrast, Kollicoat IR® resulted in amorphous dispersions of all the tested drugs, suggesting that it has a better solubilization capacity. Drugs prepared in design II achieved higher in vitro release compared to respective design I, indicating that lower content of Acryl-EZE II® or Zein can decrease drug release over 3 h. It has been also revealed that Zein could improve physical stability of the aged theophylline solid-dispersed films. Release kinetics of model drugs were satisfactory when described by first-order kinetics, facilitated through anomalous transport of both diffusion and polymer swelling.

Simultaneous determination of kaempferol, quercetin, mangiferin, gallic acid, p-hydroxybenzoic acid and chlorpheniramine maleate in rat plasma after oral administration of Mang-Guo-Zhi-Ke tablets by UHPLC-MS/MS and its application to pharmacokinetics.

Mang-Guo-Zhi-Ke tablets (MGZKTs) is an effective Chinese patent medicine. It contains mango leaf extract as the main raw material and the antihistamine drug, chlorpheniramine maleate is included in the formulation. However, its pharmacokinetic effect is rarely reported. A highly sensitive, reliable and rapid high-throughput method using ultra-high-performance liquid chromatography with tandem mass spectrometry (UHPLC-MS/MS) was used to simultaneously determine kaempferol, quercetin, mangiferin, p-hydroxybenzoic acid, gallic acid and chlorpheniramine maleate in rat plasma after oral administration of MGZKTs. The method was successfully developed and fully validated to investigate the pharmacokinetics of MGZKTs. Chloramphenicol and clarithromycin were used as internal standards (IS). A practicable protein precipitation procedure with methanol was adopted for sample preparation. The samples were separated on an Acquity UHPLC Syncronis C18 column (100 × 2.1 mm, 1.7 µm) using 0.1% formic acid-acetonitrile as the mobile phase. The flow rate was set at 0.4 mL/min. The obtained calibration curves were linear in the concentration range of ~1-1000 ng/mL for plasma (r > 0.99). Method validation results met the criteria reported in the US Food and Drug Administration guidelines. Quercetin, p-hydroxybenzoic acid and kaempferol were absorbed rapidly and reached the peak concentration between 0.16 and 0.25 h. This validated that the UHPLC-MS/MS method was successfully applied to study the pharmacokinetic parameters of the six compounds in rat plasma after oral administration of MGZKTs. This evidence will be useful for the clinical rational use of Mang-Guo-Zhi-Ke tablets.

Application of miniaturized near-infrared spectroscopy for quality control of extemporaneous orodispersible films.

Extemporaneous oral preparations are routinely compounded in the pharmacy due to a lack of suitable formulations for special populations. Such small-scale pharmacy preparations also present an avenue for individualized pharmacotherapy. Orodispersible films (ODF) have increasingly been evaluated as a suitable dosage form for extemporaneous oral preparations. Nevertheless, as with all other extemporaneous preparations, safety and quality remain a concern. Although the United States Pharmacopeia (USP) recommends analytical testing of compounded preparations for quality assurance, pharmaceutical assays are typically not routinely performed for such non-sterile pharmacy preparations, due to the complexity and high cost of conventional assay methods such as high performance liquid chromatography (HPLC). Spectroscopic methods including Raman, infrared and near-infrared spectroscopy have been successfully applied as quality control tools in the industry. The state-of-art benchtop spectrometers used in those studies have the advantage of superior resolution and performance, but are not suitable for use in a small-scale pharmacy setting. In this study, we investigated the application of a miniaturized near infrared (NIR) spectrometer as a quality control tool for identification and quantification of drug content in extemporaneous ODFs. Miniaturized near infrared (NIR) spectroscopy is suitable for small-scale pharmacy applications in view of its small size, portability, simple user interface, rapid measurement and real-time prediction results. Nevertheless, the challenge with miniaturized NIR spectroscopy is its lower resolution compared to state-of-art benchtop equipment. We have successfully developed NIR spectroscopy calibration models for identification of ODFs containing five different drugs, and quantification of drug content in ODFs containing 2-10mg ondansetron (OND). The qualitative model for drug identification produced 100% prediction accuracy. The quantitative model to predict OND drug content in ODFs was divided into two calibrations for improved accuracy: Calibration I and II covered the 2-4mg and 4-10mg ranges respectively. Validation was performed for method accuracy, linearity and precision. In conclusion, this study demonstrates the feasibility of miniaturized NIR spectroscopy as a quality control tool for small-scale, pharmacy preparations. Due to its non-destructive nature, every dosage unit can be tested thus affording positive impact on patient safety.

Capillary electrophoretic enantioseparation of basic drugs using a new single-isomer cyclodextrin derivative and theoretical study of the chiral recognition mechanism.

A novel single-isomer cyclodextrin derivative, heptakis {2,6-di-O-[3-(1,3-dicarboxyl propylamino)-2-hydroxypropyl]}-ß-cyclodextrin (glutamic acid-ß-cyclodextrin) was synthesized and used as a chiral selector in capillary electrophoresis for the enantioseparation of 12 basic drugs, including terbutaline, clorprenaline, tulobuterol, clenbuterol, procaterol, carvedilol, econazole, miconazole, homatropine methyl bromide, brompheniramine, chlorpheniramine and pheniramine. The primary factors affecting separation efficiency, which include the background electrolyte pH, the concentration of glutamic acid-ß-cyclodextrin and phosphate buffer concentration, were investigated. Satisfactory enantioseparations were obtained using an uncoated fused-silica capillary of 50 cm (effective length 40 cm) × 50 µm id with 120 mM phosphate buffer (pH 2.5-4.0) containing 0.5-4.5 mM glutamic acid-ß-cyclodextrin as background electrolyte. A voltage of 20 kV was applied and the capillary temperature was kept at 20°C. The results proved that glutamic acid-ß-cyclodextrin was an effective chiral selector for studied 12 basic drugs. Moreover, the possible chiral recognition mechanism of brompheniramine, chlorpheniramine and pheniramine on glutamic acid-ß-cyclodextrin was investigated using the semi-empirical Parametric Method 3.

Physicochemical properties and mechanisms of drug release from melt-extruded granules consisting of chlorpheniramine maleate and Eudragit FS.

The objective of this research project was to characterize the drug release profiles, physicochemical properties and drug-polymer interaction of melt-extruded granules consisting of chlorpheniramine maleate (CPM) and Eudragit® FS. Melt extrusion was performed using a single screw extruder at a processing temperature of 65-75 °C. The melt extrudate was milled, blended with lactose monohydrate and then filled into hard gelatin capsules. Each capsule contained 300 mg CPM granules. The release of CPM was determined with the United States Pharmacopeia dissolution apparatus II using a three-stage dissolution medium testing in order to simulate the pH conditions of the gastrointestinal tract. Pore structure, thermal properties and surface morphologies of CPM granules were studied using mercury and helium pycnometer, differential scanning calorimeter and scanning electron microscope. Sustained release of CPM over 10 h was achieved. The release of CPM was a function of drug loading and the size of the milled granules. The complexation between CPM and Eudragit® FS as the result of counterion condensation was observed, and the interaction was characterized using membrane dialysis and H(1) NMR techniques. In both 0.1 N HCl and phosphate buffer pH 6.8, CPM was released via a diffusion mechanism and the release rate was controlled by the pore structure of the melt-extruded granules. In phosphate buffer pH 7.4, CPM release was controlled by the low pH micro-environment created by CPM, the pore structure of the granules and the in situ complexation between CPM and Eudragit® FS.

Do pediatric medicines induce topographic changes in dental enamel?

The purpose of the present study was to evaluate the effect of common pediatric liquid medicines on surface roughness and tooth structure loss and to evaluate the pH values of these medicines at room and cold temperatures in vitro. Eighty-four bovine enamel blocks were divided into seven groups (n = 12): G1-Alivium®, G2-Novalgina®, G3-Betamox®, G4-Clavulin®, G5-Claritin®, G6-Polaramine® and G7-Milli-Q water (negative control). The pH was determined and the samples were immersed in each treatment 3x/day for 5 min. 3D non-contact profilometry was used to determine surface roughness (linear Ra, volumetric Sa) and the Gap formed between treated and control areas in each block. Scanning electron microscopy (SEM) and energy dispersive spectrometry (EDS) were also performed. The majority of liquid medicines had pH ≤ 5.50. G1, G4, and G5 showed alterations in Ra when compared with G7 (p < 0.05). According to Sa and Gap results, only G5 was different from G7 (p < 0.05). Alteration in surface was more evident in G5 SEM images. EDS revealed high concentrations of carbon, oxygen, phosphorus, and calcium in all tested groups. Despite the low pH values of all evaluated medicines, only Alivium®, Clavulin®, and Claritin® increased linear surface roughness, and only Claritin® demonstrated the in vitro capacity to produce significant tooth structure loss.